For Sales and Service Call (715) 821-5554

BEARON AQUATICS ICE-EATER Dock Deicng Pumps

 

How ICE EATER Works

The Ice Eater’s propeller draws up warmer subsurface water through our patented Venturi-styled housing and deflects it to the surface. By creating a constant circulation of the warmer subsurface water, the Ice Eater prevents further ice formation and melts existing ice. Moving water does not freeze.

Every Ice Eater unit includes the motor voltage and cord length you specified when ordering. Units are shipped in a single box and can be installed minutes after unboxing. The unit comes fully assembled with a patented venturi shroud, brackets, propeller, sacrificial anode, quick-disconnect power cord, and mooring lines. The Ice Eater can go straight from the box to the water in minutes. No tools required. A minimum of 24" of water is required, allowing for at least 12" of clearance between the bottom of the river, lake, or pond.

Our slogan is “protect your assets before the ice sets.” It is better to run your Ice Eater BEFORE a freeze to get the best results and the largest area of open water. Waiting until the ice has already formed means more work for you and the unit. Your time is valuable, and you worked hard to purchase the dock and boat of your dreams, protect them. Don’t wait until you have to cut a hole in the ice and work with frozen fingers to set the unit to its perfect position.

Additional accessories are available to make your unit even more efficient. Consider a thermostat to detect dropping temperatures, automatically have your Ice Eater turn on and off. Units come standard with mooring lines, but consider a dock mount upgrade for easier maneuvering.

ICE EATER Simulation & Results

When You Should Use The ICE EATER

 The Ice Eater is used to protect your docks, piers, marinas, and boats from ice and ice damage. Ice can twist your dock and even completely pull pilings out of the ground without protection from the Ice Eaters. Some boat owners pull their boats from the water during the winter months, costing them wrapping fees and storage. Pulling a boat is a major time commitment. Another option is to use an Ice Eater to protect your boats during the winter, preventing ice scratches and punctures on the coldest days. This allows you, your friends, and your family the ability to take advantage of those unseasonably warm winter days and go for that surge of the moment high seas adventure. You can’t get back on your boat at a moment’s notice if it’s been stored away. The 1Hp Ice Eater can clear an area as large as 80′ to protect your assets before the ice sets.

Why Should You Buy The ICE EATER

  •  Patented venturi design creates superior water flow and direction which protects your water craft or dock structure
  • Engineered for high performance AND energy efficiency these units are among the best in the industry with a 50+ year proven track record
  • Environmentally friendly, non-toxic, biodegradable dialectic fluid surrounds the internal motor giving maximum pump cooling and longevity
  • Standard unit allows for [5] five deicing angles with no additional hardware
  • Bronze endbell ensures long life with no cracking or warping
  • Heavy-duty PVC shroud protects the propeller and electric motor
  • Optional dock mounting hardware and thermostatic controller available
  • And best of all, our comprehensive 3-year warranty

BEARONS 1/2HP ICE EATER Pricing                                 

  • P500 | 120v and 240v | 1/2hp | 025' Power Cord | Single Phase | w/o Control Panel | MSRP $1,125.00 | Ship Weight 32lbs
  • P500 | 120v and 240v | 1/2hp | 050' Power Cord | Single Phase | wo/ Control Panel | MSRP $1,185.00 | Ship Weight 36lbs
  • P500 | 120v and 240v | 1/2hp | 100' Power Cord | Single Phase | w/o Control Panel | MSRP $1,285.00 | Ship Weight 46lbs
  • 3 Year Warranty
  • Thermostat Available | 120v or 240v $135.00 | Ship Weight 8lbs
  • Dock Mount Hardware for P500 Series $300.00 | Does Not Include Pipe | Ship Weight 22lbs

BEARONS 3/4HP ICE EATER Pricing                                       

  • P750 | 120v and 240v | 3/4hp | 025' Power Cord | Single Phase | w/o Control Panel | MSRP $1,155.00 | Ship Weight 41lbs
  • P750 | 120v and 240v | 3/4hp | 050' Power Cord | Single Phase | wo/ Control Panel | MSRP $1,215.00 | Ship Weight 43lbs
  • P750 | 120v and 240v | 3/4hp | 100' Power Cord | Single Phase | w/o Control Panel | MSRP $1,315.00 | Ship Weight 47lbs
  • 3 Year Warranty
  • Thermostat Available | 120v or 240v $135 | Ship Weight 8lbs
  • Dock Mount Hardware for P750 Series $300.00 | Does Not Include Pipe | Ship Weight 22lbs

BEARONS 1HP ICE EATER Pricing                                       

  • P1000 | 120v and 240v| 1hp | 025' Power Cord | Single Phase | w/o Control Panel | MSRP $1,275.00 | Ship Weight 43lbs
  • P1000 | 120v and 240v | 1hp | 050' Power Cord | Single Phase | wo/ Control Panel | MSRP $1,325.00 | Ship Weight 46lbs
  • P1000 | 120v and 240v | 1hp | 100' Power Cord | Single Phase | w/o Control Panel | MSRP $1,450.00 | Ship Weight 51lbs
  • 3 Year Warranty
  • Thermostat Available | 120v or 240v $135 | Ship Weight 8lbs
  • Dock Mount Hardware for P1000 Series $300 | Does Not Include Pipe | Ship Weight 22lbs

 

    Optional Dock Mount Hardware & Thermostats

        

    If you would like to learn more about BEARON Aquatics WATER-FOWLER deicing set ups that uses the BEARON Aquatics ICE EATERs, and is specifically designed for waterfowl hunting applications, follow this link below and we'll get you there!

    Water Fowler Deicing

     

    To place an order for any BEARON AQUATICS products, please contact our sales staff at 715-821-5554 - We'll send you an Email with a link and your product already in our shopping cart for quick and easy checkouts!